Skip to main content

Reliability Test Standards

Certified semiconductor testing laboratory ensuring AEC-Q101 automotive compliance, JEDEC standard environmental stress, and zero-defect quality.

AEC-Q101 / MIL-STD-750 / JEDEC JESD22

State-of-the-Art Reliability Testing Laboratory

CTK Electronics operates an in-house reliability testing facility equipped with environmental stress chambers, high-voltage reverse bias (HTRB) systems, ESD simulators, and electron microscopy (SEM/EDX) for rigorous qualification.

100%
AOI & Electrical Testing
1000h
Standard HTRB Stress
AEC-Q101
Automotive Grade Line
1000
Thermal Cycling Pass

Environmental & Climatic Stress Tests

Simulating extreme environmental temperatures, thermal shock, and high humidity operating conditions.

04

High Temperature Reverse Bias (HTRB)

1000 Hours
Reference Standard: JESD22-A108 / MIL-STD-750-1 M1038
Test Condition: Tj = 150°C, VR = 80% VBR
Sample Size: 77 pcs / 3 lots

Evaluates junction stability and oxide layer integrity under high reverse voltage and temperature.

High Temperature Gate Bias (HTGB)

1000 Hours
Reference Standard: JESD22-A108
Test Condition: Ta = 150°C, VGS = 100% Maximum
Sample Size: 77 pcs / 3 lots

Verifies gate dielectric reliability for MOSFETs under continuous gate stress.

Temperature Cycling (TC)

1000 Cycles
Reference Standard: JESD22-A104
Test Condition: -55°C to +150°C, Transfer Time < 1 min
Sample Size: 77 pcs / 3 lots

Assesses thermal expansion matching and solder joint/wire bond mechanical integrity.

High Temp High Humidity Bias (H3TRB / HAST)

1000 Hours (or 96 Hrs HAST)
Reference Standard: JESD22-A101 / JESD22-A110
Test Condition: 85°C / 85% RH, VR = 80% (or 130°C/85%RH HAST)
Sample Size: 77 pcs / 3 lots

Tests corrosion resistance and moisture ingress along package leadframe interfaces.

Life & Electrical Endurance Tests

Accelerated life testing under continuous electrical load and switching stresses.

03

Intermittent Operational Life (IOL)

6,000 Cycles
Reference Standard: MIL-STD-750-1 M1037
Test Condition: ΔTj ≥ 100°C (Power On/Off Cycling)
Sample Size: 77 pcs / 3 lots

Evaluates fatigue resistance of wire bonds and die attach interfaces under power cycling.

Electrostatic Discharge Immunity (ESD)

Pulse Stress
Reference Standard: ANSI/ESDA/JEDEC JS-001 (HBM) / JS-002 (CDM)
Test Condition: Human Body Model (HBM) & Charged Device Model (CDM)
Sample Size: 30 pcs / lot

Determines ESD immunity ratings (Class 1C/2/3A) to protect against handling discharge.

Surge Immunity (8/20μs & 10/1000μs)

Standard Pulses
Reference Standard: IEC 61000-4-5 / MIL-STD-750
Test Condition: Peak Pulse Current (IPP) Waveform Injection
Sample Size: 30 pcs / lot

Verifies clamping performance and peak pulse power dissipation for TVS and ESD protection diodes.

Mechanical & Construction Analysis

Physical robustness, package lead integrity, solderability, and destructive physical analysis (DPA).

03

Solderability & Resistance to Soldering Heat (RSH)

10 sec dip
Reference Standard: JESD22-B102 / JESD22-B106
Test Condition: Lead-free Solder Dip @ 260°C ± 5°C
Sample Size: 30 pcs / lot

Ensures lead tinning quality, wetting > 95%, and zero package thermal degradation during SMT reflow.

Wire Bond Pull & Die Shear Strength

Destructive Test
Reference Standard: MIL-STD-750 M2037 / M2017
Test Condition: Calibrated Micro-force Pull/Shear Tester
Sample Size: 30 wires / 5 dice

Guarantees mechanical bond strength of internal gold/copper wires and die attach epoxy/solder.

Destructive Physical Analysis (DPA)

Analytical Test
Reference Standard: EIA-469 / MIL-STD-1580
Test Condition: Decapsulation, Cross-sectioning, SEM / EDX Analysis
Sample Size: Per Lot Audit

Inspects die surface metallization, wafer fabrication quality, and crystal structure defects.

Need Direct Technical Support or Custom Testing?

Our FAE engineering team is ready to assist with circuit design, sample testing, and custom qualification requirements.

CTK Electronics

EST. 2010 · Choice of Reliability

Dongguan Tongke Electronic Co., Ltd. — Professional semiconductor manufacturer of discrete components and integrated circuits since 2010.

Dongguan Tongke Electronic Co., Ltd.

liuchuge@ctk-elec.com

No.3, Chayuan Road 3rd Street, Ailingkan, Dalingshan, Dongguan, Guangdong, China

Quality Standards

  • IATF 16949IATF 16949 Automotive Certified
  • ISO 9001ISO 9001:2015 Quality System
  • ISO 14001ISO 14001 Environmental System
  • RoHS / REACHEU RoHS & REACH Compliant

© 2026 CTK Electronics (Dongguan Tongke Electronic Co., Ltd.). All rights reserved.

Dongguan Tongke Electronic Co., Ltd. · EST. 2010